How Unbrickable Resurrector for Windows 64 Can Save Your Bricked Android Device
Unbrickable Resurrector for Windows 64: How to Restore Your Bricked Android Device
Have you ever experienced a situation where your Android device suddenly stops working and becomes unresponsive? If yes, then you might have encountered a problem known as "bricking". Bricking is a term used to describe a device that is rendered useless due to a software or hardware failure. In this article, we will explain what causes bricking, how to prevent it, and how to fix it using a powerful tool called Unbrickable Resurrector.
unbrickable resurrector for windows 64
What is a bricked device and why does it happen?
A bricked device is one that cannot boot up or function normally due to a corrupted or damaged system software. This can happen for various reasons, such as installing incompatible or malicious apps, flashing custom ROMs or kernels, rooting or unlocking the bootloader, updating the firmware incorrectly, or having a hardware malfunction. Depending on the severity of the damage, a bricked device can be classified into two types: soft bricked and hard bricked.
Soft bricking vs hard bricking
A soft bricked device is one that can still access the recovery mode or the bootloader mode, but cannot boot into the normal operating system. This means that there is still some hope of restoring the device by flashing a new firmware or performing a factory reset. A soft bricked device usually shows symptoms such as boot loops, stuck on logo screen, black screen, or error messages.
A hard bricked device is one that cannot access any mode at all, and is completely dead. This means that there is no way of communicating with the device or repairing it through software methods. A hard bricked device usually shows no signs of life, such as no power, no vibration, no sound, no LED light, or no response to any button combinations. A hard bricked device may require professional service or replacement.
Common causes of bricking
Some of the most common causes of bricking are:
Installing incompatible or malicious apps that interfere with the system files or settings.
Flashing custom ROMs or kernels that are not compatible with your device model or firmware version.
Rooting or unlocking the bootloader without following the proper steps or precautions.
Updating the firmware incorrectly or using an unofficial source.
Having a hardware malfunction due to physical damage, water exposure, overheating, or battery issues.
To prevent bricking your device, you should always:
Backup your data before making any changes to your system software.
Download and install apps only from trusted sources and scan them for viruses.
Follow reliable guides and tutorials when flashing custom ROMs or kernels, rooting or unlocking the bootloader, or updating the firmware.
Use official tools and drivers when connecting your device to your PC.
Take good care of your device and avoid exposing it to extreme temperatures, moisture, or impact.
What is Unbrickable Resurrector and how does it work?
If you have accidentally bricked your device and you are looking for a way to fix it, then you might want to try Unbrickable Resurrector. Unbrickable Resurrector is a powerful tool that can help you restore your bricked Android device in just a few clicks. It works by injecting a special code into your device's memory chip that allows it to bypass the corrupted system software and boot into a recovery mode. From there, you can flash a new firmware or perform a factory reset to revive your device.
Features and benefits of Unbrickable Resurrector
Some of the features and benefits of Unbrickable Resurrector are:
It can fix both soft bricked and hard bricked devices.
It supports most Android devices from various brands and models.
It works on Windows 64-bit operating systems.
It has a simple and user-friendly interface that guides you through the process.
It is free to download and use.
Supported devices and operating systems
Unbrickable Resurrector supports most Android devices from various brands and models, such as Samsung, LG, HTC, Sony, Huawei, Motorola, Xiaomi, OnePlus, etc. However, some devices may require additional steps or drivers to be recognized by the tool. You can check the compatibility list on the official website of Unbrickable Resurrector for more details.
Unbrickable Resurrector works on Windows 64-bit operating systems only. You will need a PC with at least 4 GB of RAM and 10 GB of free disk space. You will also need a USB cable to connect your device to your PC.
Download and installation instructions
To download and install Unbrickable Resurrector on your PC, follow these steps:
Go to the official website of Unbrickable Resurrector and click on the download button.
Save the file on your PC and extract it using WinRAR or any other extraction tool.
Open the extracted folder and run the setup.exe file as administrator.
Follow the instructions on the screen to complete the installation process.
You may need to restart your PC after the installation is finished.
How to use Unbrickable Resurrector to fix your bricked device
To use Unbrickable Resurrector to fix your bricked device, follow these steps:
Step 1: Connect your device to your PC
The first step is to connect your device to your PC using a USB cable. Make sure that your PC recognizes your device as a removable disk or an unknown device. If not, you may need to install additional drivers for your device model. You can find them on the official website of your device manufacturer or on XDA Developers forum.
Step 2: Launch Unbrickable Resurrector and select your device model
The next step is to launch Unbrickable Resurrector on your PC. You will see a welcome screen with some information about the tool. Click on Next to proceed. You will then see a list of supported devices. Select your device model from the list and click on Next again. If you don't see your device model in the list, you can try selecting a similar one or contact the developer for assistance.
Step 3: Choose the recovery mode and follow the instructions
The third step is to choose the recovery mode that suits your situation. There are two options available: Normal Mode and Advanced Mode. Normal Mode is recommended for most users as it is easier and faster. Advanced Mode is for advanced users who want more control over the process. Choose one option and click on Next.
You will then see some instructions on how to put your device into download mode or fastboot mode depending on your choice. Follow them carefully and make sure that you don't disconnect or interrupt the process until it is finished. You will see a progress bar showing you how much time is left until completion.
Step 4: Wait for the process to complete and reboot your device
Tips and precautions for using Unbrickable Resurrector
Before using Unbrickable Resurrector to fix your bricked device, you should keep in mind some tips and precautions to avoid any problems or errors. Here are some of them:
Backup your data before using Unbrickable Resurrector
One of the most important things to do before using Unbrickable Resurrector is to backup your data. This is because using Unbrickable Resurrector may erase all your data on your device or make it inaccessible. Therefore, you should backup your contacts, messages, photos, videos, music, documents, and any other important files on your device to a safe place such as your PC, an external hard drive, or a cloud service. You can use tools such as Samsung Smart Switch, LG Bridge, HTC Sync Manager, Sony Xperia Companion, Huawei HiSuite, or Google Drive to backup your data.
Charge your device battery to at least 50%
Another thing to do before using Unbrickable Resurrector is to charge your device battery to at least 50%. This is because using Unbrickable Resurrector may consume a lot of power and drain your battery quickly. If your battery runs out during the process, it may cause more damage to your device or make it impossible to fix. Therefore, you should plug in your device to a power source or use a fully charged spare battery if you have one.
Do not disconnect or interrupt the process until it is finished
The last thing to do before using Unbrickable Resurrector is to not disconnect or interrupt the process until it is finished. This is because disconnecting or interrupting the process may cause errors or failures that may worsen the condition of your device or make it irreparable. Therefore, you should make sure that you have a stable connection between your device and your PC, and that you do not close the tool or turn off your PC until the process is completed.
Conclusion and FAQs
In conclusion, Unbrickable Resurrector is a powerful tool that can help you restore your bricked Android device in just a few clicks. It works by injecting a special code into your device's memory chip that allows it to bypass the corrupted system software and boot into a recovery mode. From there, you can flash a new firmware or perform a factory reset to revive your device. Unbrickable Resurrector supports most Android devices from various brands and models, and works on Windows 64-bit operating systems. It has a simple and user-friendly interface that guides you through the process. It is free to download and use.
If you have any questions about Unbrickable Resurrector or how to use it, you can check out some of the frequently asked questions below:
Question
Answer
Where can I download Unbrickable Resurrector?
You can download Unbrickable Resurrector from its official website: https://unbrickableresurrector.com/
Is Unbrickable Resurrector safe to use?
Yes, Unbrickable Resurrector is safe to use as long as you follow the instructions carefully and use it at your own risk. However, there is no guarantee that it will work for every device or situation.
Will Unbrickable Resurrector void my warranty?
Possibly. Using Unbrickable Resurrector may void your warranty if it involves rooting or unlocking the bootloader of your device. You should check with your device manufacturer or carrier before using Unbrickable Resurrector.
What if Unbrickable Resurrector does not work for my device?
If Unbrickable Resurrector does not work for your device, you can try other methods such as using Odin, SP Flash Tool, Fastboot Commands, Qualcomm Flash Tool, etc. You can find more information on how to use these methods on XDA Developers forum or YouTube videos.
Who developed Unbrickable Resurrector?
Unbrickable Resurrector was developed by a team of Android enthusiasts who wanted to help other users fix their bricked devices. You can contact them through their website or social media accounts for feedback or support.
